Our first entry in a line up of Grout Plants to come, the D-9 is a culmunation of 15+ years of experience in the industry. Developed by INTRIC to serve as your workhorse for all of your grout needs. The D-9 was designed to check all boxes and perform day in and day out so you never have to worry about finding a replacement in a market where products are hard to come by. But don’t take our word for it, check out the specs below!
The D-9 both sells and ships internationally, so its available when and where you need it.
Frame
- Skid mounted steel frame, partially encased
- Forklift slots
- Powder coat
Water Dosage
- Water distributor with flushing connection
- Water-holding and dosing tank V=2×160 l (2×42.32 U.S. gal)
- Two-piece, hand-operated outlet valve
Two-Piece Mixing Tank
- Round tank, bottom inclined to outlet
- Tank capacity: 230 l (60.84 U.S. gal)
- Hopper with bag ripper
Delivery Pump
- Double-acting, single-piston, horizontal pump
Tools in Mixing Tank
- High shear colloidal mixing element
- Drive bearing above the mixing level
- No packing seal, therefore runs dry without problems
Delivery Pressure
- Pressure transmitter to digital indicator
Operating Elements
- Two turning knobs for variable speed mixing
- Turning knob for adjusting maximum pressure
- Turning knob for changing speed of delivery rate (l/min/U.S. gal/min)
- On/off switch for delivery pump (grouting pump)
- 2 x on/off button for semi-automatic water dosage (special equipment SA 7/2)
Hydraulic
- Oil tank capacity approximately 151.42 l (40 U.S. gal)
- Oil filling and breather filter
- Oil level and temperature indication
- Electric cooling fan
Diesel Drive
- Three-cylinder Kubota Diesel Engine, Tier 4 Final, liquid-cooled
- 49.5HP
- Tank capacity approximately 83.28 l (22 U.S. gal)
- Starter battery
Optional Extras
- Spare parts sets
- Pressure hoses
- Remote controls
Engine
Kubota Diesel Engine, Tier 4 Final, Stage III B
49.5HP. Fuel Burn Rate:
- 2200 rpm = 2.22 gal/h • 2400 rpm = 2.48 gal/h
Mixing Tank
- High-shear mixing tool mounted in the middle on mixing shaft, high-shear mixing and colloidal tool mounted on mixing shaft bottom part
- Adjustable mixing speed from 0-1800 rpm hydraulic driven
- Mixing performance on W/C ratio down to 0.32 by weight
- Mixing tank acts as storage tank simply by turning down mixing speed after mix is ready
- Capacity: 2 x 60 gal
Grout Pump
- Single hydraulic-driven, double-acting piston pump, check valve operated suction and pressure valves
- Maximum Flow: 30 gal/min (113.5 liter/min)*
- Maximum Pressure: 1800 PSI (120 bar)*
Power Pack
- Power Pack contains hydraulic tank (40 gal) and diesel tank (22 gal) as well as Diesel Engine and Hydraulic Intelligence
- The Power Pack is completely detachable from main frame for the possibility to operate Mixer and Pump Unit from a certain distance (inside buildings or tunnels) simply by extending hydraulic lines and Control cables
Digital Screen
Monitor flow and pressure on internal digital screen. Volume is calculated by stroke counting.**
Specifications
- Dimensions: 47x95x75
- Weight: 3800 lbs
*Both maximum performances are not reachable at the same time.
**Flow on display is a theoretical calculated volume by
counting the strokes. Accuracy can be off by 100% (if suction line
is not connected or hoses are plugged, etc., pump will continue
to count!).
